6-4 Chapter 6: NVIDIA
®
SLI™ technology support
7. Connect a VGA cable or a DVI-I cable to the graphics card/s.
We recommend to install an additional chassis fan for better thermal
environment.
5. Align and insert the SLI connector to the goldngers on each graphics
card. Make sure that the connector is rmly in place.
6. When installing two VGA cards using a 20-pin ATX PSU with
sufcient+12v capability, we recommend that you connect the
auxillary power source from the power supply to the graphics card.
Refer to the PSU documentation for dual VGA power requirements.
SLI connector
To Next Page
Loading...
