Asus M3A GREEN - Onboard Devices Configuration

2-28 Chapter 2: BIOS setup
2.4.6 Onboard Devices Conguration
Allows BIOS to Select
Serial Port1 Base
Addresses.
Onboard Devices Conguraiton
Serial Port1 Address [3F8/IRQ4]
HD Audio Azalia Device [Auto]
Front Panel Support Type [HD Audio]
Onboard Attansic L1 Lan [Enabled]
Onboard Attansic L1 LAN Boot [Disabled]
Primary Display Adapter [PCI-E]
Advanced
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Conguration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4] [2E8/IRQ3]
HD Audio Azalia Device [Auto]
Allows you to enable or disable the High Denition Audio. The following item
appears only when you set this item to [Auto].
Conguration options: [Auto] [Disabled]
Front Panel Support Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or
high-denition audio depending on the audio standard that the front panel audio
module supports.
Conguration options: [AC97] [HD Audio]
Onboard Attansic L1 Lan [Enabled]
Conguration options: [Enable] [Disabled]
Onboard Attansic L1 Lan Boot Rom [Disabled]
This item appears only when you enable the previous item.
Conguration options: [Enable] [Disabled]
Primary Display Adapter [PCI-E]
Allows you to select which graphics controller to use as the primary boot device.
Conguration options: [PCI-E] [PCI] [Onboard]