Asus M3N78 - RAID Driver Disk Creation

3-10 Chapter 3: Software support
3.3 Creating a RAID driver disk
A oppy disk with the RAID driver is required when installing Windows
®
XP OS on
a hard disk drive that is included in a RAID set.
To create a RAID driver disk:
1. Place the motherboard Support DVD into the DVD-ROM drive.
2. Select Make Disk tab.
3. From the Make Disk menu, select the RAID driver disk you want to create or
browse the contents of the Support DVD to locate the driver disk utility.
For detailed descriptions on the NVIDIA RAID conguration, refer to the “NVIDIA
SATA RAID User’s Manual” found in your motherboard Support DVD.
4. Insert a oppy disk to the oppy disk drive.
5. Follow the succeeding screen information to complete the process.
6. Write-protect the oppy disk to avoid computer virus infection.
To install the RAID driver:
1. During the OS installation, the system prompts you to press the
F6 key to
install third-party SCSI or RAID driver.
2. Press
<F6> then insert the oppy disk with RAID driver into the oppy disk
drive.
3. Follow the succeeding screen instructions to complete the installation.
Due to chipset limitation, the Serial ATA ports supported by the NVIDIA chipset
does not support Serial Optical Disk Drives (Serial ODD) under DOS.