Do you have a question about the Asus M5A78L-M LX V2 and is the answer not in the manual?
ECC | Yes |
---|---|
Memory channels | Dual-channel |
Memory slots type | DIMM |
Number of memory slots | 2 |
Supported memory types | DDR3-SDRAM |
Maximum internal memory | 8 GB |
Supported memory clock speeds | 1066, 1333, 1600, 1866 MHz |
Supported memory module capacities | 4GB |
System bus rate | 5.2 GT/s |
Processor socket | Socket AM3+ |
Processor manufacturer | AMD |
Compatible processor series | AMD Phenom II X2, AMD Phenom II X3, AMD Phenom II X4, AMD Phenom II X6 |
USB 2.0 connectors | 3 |
Power fan connector | No |
Number of SATA II connectors | 6 |
Number of EATX power connectors | 1 |
Number of Parallel ATA connectors | 0 |
USB 2.0 ports quantity | 4 |
Audio chip | Realtek ALC887 |
Cooling type | Active |
Component for | PC |
Power source type | ATX |
Motherboard chipset | AMD 760G |
Audio output channels | 7.1 channels |
Motherboard form factor | micro ATX |
Motherboard southbridge | AMD SB710 |
RAID levels | 0, 1, 10, JBOD |
Supported storage drive interfaces | SATA II |
Cables included | SATA |
Graphics card | Radeon HD 3000 |
DirectX version | 10.0 |
Maximum resolution | 2560 x 1440 pixels |
Graphics card family | ATI |
Parallel processing technology support | Hybrid CrossFireX |
PCI Express slots version | 2.0 |
Controller interface type | SB710 |
LAN controller | Realtek RTL8111E |
Networking features | Gigabit Ethernet |
BIOS type | AMI |
ACPI version | 2.0a |
BIOS memory size | 16 Mbit |
Depth | 203 mm |
---|---|
Width | 244 mm |
Presents a multilingual welcome and explains the guide's essential information for system setup.
Instructions for installing the Central Processing Unit (CPU) onto the motherboard.
Guide for mounting the CPU cooler and fan assembly for heat dissipation.
Steps for correctly inserting RAM modules into the motherboard slots.
Procedure for connecting SATA hard drives or SSDs to the motherboard.
How to insert expansion cards like graphics cards into PCI-e slots.
Connecting front panel power, reset, LEDs, and audio headers to the motherboard.
Connecting the main ATX power connectors to the motherboard for system power.
Instructions for initial system power-on and installing the operating system and drivers.