Asus M5A88-V EVO - Chapter 2: TPU Switch Functionality; Enabling and Disabling the TPU Switch

ASUS M5A88-V EVO 2-19
Chapter 2
2. TPU switch
This switch allows you to enable or disable the TPU function.
M5A88-V EVO
M5A88-V EVO TPU switch
TPU
• The
O2LED2
LED near the TPU switch lights when the switch setting is turned to
Enable
. Refer to section
2.9 Onboard LEDs
for the exact location of the
O2LED2
LED.
• If you clear the CMOS or load the BIOS setup defaults, the related overclocking items
in the BIOS menu follow the current setting of the TPU switch.
• If you change the switch setting to
Enable
under the OS environment, the TPU
function will be activated after the next system bootup.
• You may use the TurboV Auto Tuning, overclock in the BIOS setup program, and
enable the TPU function at the same time. However, the system will use the last
setting you have made.