Asus M5A97 - Dram Timing Control

ASUS M5A97 PLUS
2-15
2.4.11 DRAM Timing Control
The sub‑items in this menu allow you to set the DRAM timing control features. Use the
<+> and <‑> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press <Enter>.
Changing the values in this menu may cause the system to become unstable! If this
happens, revert to the default settings.
DRAM CAS# Latency [Auto]
You can key in the desired value using the numeric keypad. The values range from 4 to 12.
DRAM RAS# to CAS# Delay [Auto]
You can key in the desired value using the numeric keypad. The values range from 5 to 12.
DRAM RAS# PRE Time [Auto]
You can key in the desired value using the numeric keypad. The values range from 5 to 12.
DRAM RAS# ACT Time [Auto]
You can key in the desired value using the numeric keypad. The values range from 15 to 30.
DRAM READ to PRE Time [Auto]
You can key in the desired value using the numeric keypad. The values range from 4 to 7.
DRAM RAS# to RAS# Delay [Auto]
You can key in the desired value using the numeric keypad. The values range from 4 to 7.
DRAM WRITE to READ Delay [Auto]
You can key in the desired value using the numeric keypad. The values range from 4 to 7.
DRAM CAS# write Latency [Auto]
You can key in the desired value using the numeric keypad. The values range from 5 to 12.
DRAM WRITE Recovery Time [Auto]
Conguration options: [Auto] [5] [6] [7] [8] [10] [12]
DRAM REF Cycle Time [Auto]
Conguration options: [Auto] [90ns] [110ns] [160ns] [300ns] [350ns]
DRAM Row Cycle Time [Auto]
You can key in the desired value using the numeric keypad. The values range from 11 to 42.
DRAM READ to WRITE Delay [Auto]
You can key in the desired value using the numeric keypad. The values range from 3 to 17.
DRAM WRITE to READ Delay(DD) [Auto]
You can key in the desired value using the numeric keypad. The values range from 2 to 10.
DRAM WRITE to WRITE Timing [Auto]
You can key in the desired value using the numeric keypad. The values range from 2 to 10.