Asus M5A97 - Page 45

ASUS M5A97 PLUS
2-17
Data drive strength [Auto]
Conguration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
DQS drive strength [Auto]
Conguration options: [Auto] [0.75x] [1x] [1.25x] [1.5x]
Processor ODT [Auto]
Conguration options: [Auto] [240 ohms +/‑ 20%] [120 ohms +/‑ 20%] [60 ohms +/‑ 20%]
Some of the following items are adjusted by typing the desired values using the numeric
keypad and press the <Enter> key. You can also use the <+> / <‑> keys to adjust the value.
To restore the default setting, type [auto] using the keyboard and press the <Enter> key.
2.4.13 CPU Load-Line Calibration [Auto]
Allows you to select the CPU Load‑Line mode. Conguration options: [Auto] [Disabled]
[Enabled]
2.4.14 CPU/NB Load-Line Calibration [Auto]
Allows you to select the CPU/NB Load‑Line mode. Conguration options: [Auto] [Disabled]
[Enabled]
2.4.15 CPU & NB Voltage [Offset Mode]
Allows you to set the CPU & NB Voltage Mode. Different sub‑items appear according to the
CPU & NB Voltage Mode item setting. Conguration options: [Offset Mode] [Manual Mode]
CPU Offset Mode Sign [+]
This item appears only when you set the CPU & NB Voltage item to [Offset Mode] and
allows you to set the offset mode sign. Conguration options: [+] [‑]
CPU Offset Voltage [Auto]
This item appears only when you set the CPU & NB Voltage item to [Offset Mode] and
allows you to set the CPU Offset voltage. The values range from 0.006250V to 0.7V with a
0.006250V interval.
CPU/NB Offset Mode Sign [+]
This item appears only when you set the CPU & NB Voltage item to [Offset Mode] and
allows you to set the offset mode sign. Conguration options: [+] [‑]
CPU/NB Offset Voltage [Auto]
This item appears only when you set the CPU & NB Voltage Mode item to [Offset Mode] and
allows you to set the CPU/NB Offset voltage. The values range from 0.00625V to 0.5V with a
0.00625V interval.
CPU Manual Voltage [Auto]
This item appears only when you set the CPU & NB Voltage item to [Manual Mode] and
allows you to set a xed CPU voltage.
CPU/NB Manual Voltage [Auto]
This item appears only when you set the CPU & NB Voltage item to [Manual Mode] and
allows you to set a xed CPU/NB voltage.