ASUS M5A99X EVO 3-17
Chapter 3
If you use a SATA optical drive to run the Windows OS installation disk, we strongly
recommend that you install the optical drive to the SATA connectors 5/6 and set them to
[IDE] mode.
S.M.A.R.T Status Check [Enabled]
[Enabled] Enables the S.M.A.R.T feature.
[Disabled] Disables the S.M.A.R.T feature.
SATA Hot Plug on PORT1 [Disabled]
Configuration options: [Enabled] [Disabled]
SATA Hot Plug on PORT2 [Disabled]
Configuration options: [Enabled] [Disabled]
SATA Hot Plug on PORT3 [Disabled]
Configuration options: [Enabled] [Disabled]
SATA Hot Plug on PORT4 [Disabled]
Configuration options: [Enabled] [Disabled]
SATA Hot Plug on PORT5 [Disabled]
Configuration options: [Enabled] [Disabled]
SATA Hot Plug on PORT6 [Disabled]
Configuration options: [Enabled] [Disabled]