Asus MAXIMUS IX HERO - Page 33

ASUS MAXIMUS IX HERO BIOS Manual
33
Tweaker’s Paradise
FCLK Frequency for Early Power On
This item allows you to set the FCLK Frequency for Early Power On.
Conguration options: [Auto] [Normal (800 MHz)] [1GHz] [400 MHz]
Initial BCLK Frequency
This item allows you to start overclocking the system from the initial BCLK (base clock)
frequency to the assigned BCLK frequency. Use the <+> or <-> to adjust the value.
The values range from 40.0000 MHz to 1000.0000 MHz.
BCLK Amplitude
This item allows you to set the magnitude of the base clock driven for the processor.
Conguration options: [Auto] [700mV] [800mV] [900mV] [1000mV]
BCLK Slew Rate
Conguration options: [Auto] [1.5V/ns] [2.5V/ns] [3.5V/ns] [4.5V/ns]
BCLK Spread Spectrum
This item allows you to reduce the EMI. Disable to get more accurate base clocks.
Conguration options: [Auto] [Disabled] [-0.22] [-0.34] [-0.46] [+0.12] [+0.22] [+0.28]
[+0.38] [+0.17]
BCLK Frequency Slew Rate
Conguration options: [Auto] [Disabled] [32us/MHz] [64us/MHz] [128us/MHz]
[512us/MHz]
DRAM VTT Voltage
Conguration options: [Auto] [0.50000] - [1.30000]
VPPDDR Voltage
Conguration options: [Auto] [1.86500] - [3.13500]
DMI Voltage
Conguration options: [Auto] [0.30000] - [1.90000]
Core PLL Voltage
The congurations for this option differs when LN2 Mode is enabled or disabled.
LN2 Disabled: [Auto] [0.70000] - [1.60000]
LN2 Enabled: [Auto] [0.70000] - [2.40000]
Internal PLL Voltage
Conguration options: [Auto] [0.900] - [1.845]
PLL Bandwidth
Select Level 6 to Level 8 when overclocking High BCLK or High CPU frequency.
Conguration options: [Auto] [Level 0] - [Level 10]
Eventual DRAM Voltage
The congurations for this option differs when LN2 Mode is enabled or disabled.
LN2 Disabled: [Auto] [1.0000] - [2.0000]
LN2 Enabled: [Auto] [1.0000] - [2.4000]