3-22
Chapter 3: BIOS setup
Chapter 3
Eventual CPU Input Voltage [Auto]
Allows you to set the Eventual CPU Input Voltage. Use <+> or <-> key to adjust the value.
The values range from 0.800V to 2.440V at 0.010V increment.
DRAM Voltage [Auto]
Allows you to set the voltage for the system memory. Use <+> or <-> key to adjust the value.
The values range from 1.20V to 2.40V at 0.005V increment.
PCH VLX Voltage [Auto]
Allows you to set the PCH VLX voltage. Use <+> or <-> key to adjust the value. The values
range from 0.8000V to 2.0000V at 0.00625V increment.
PCH Voltage [Auto]
Allows you to set the PCH voltage. Use <+> or <-> key to adjust the value. The values range
from 0.7000V to 1.8000V at 0.00625V increment.
VTTDDR Voltage [Auto]
Allows you to set the VTTDDR voltage. Use <+> or <-> key to adjust the value. The values
range from 0.6000V to 1.4000V at 0.00625V increment.
DRAM CTRL REF Voltage [Auto]
Allows you to set the fraction of DRAM voltage given as reference on the Control lines. Use
<+> or <-> key to adjust the value. The values range from 0.3950x to 0.6300 at 0.0050x
increment.
DRAM DATA REF Voltage on CHA [Auto]
Allows you to set the fraction of DRAM voltage given as reference on the data lines of
Channel A. Use <+> or <-> key to adjust the value. The values range from 0.3950x to 0.6300
at 0.0050x
DRAM DATA REF Voltage on CHB [Auto]
Allows you to set the fraction of DRAM voltage given as reference on the data lines of
Channel B. Use the <+> or <-> keys to adjust the value.
CPU Spread Spectrum [Auto]
Allows you to enable, disable or set to automatic, the BCLK overclocking ability.
Conguration options: [Auto] [Enabled] [Disabled]
BCLK Recovery [Enabled]
Allows you to enable or disable the BCLK recovery feature.
Conguration options: [Enabled] [Disabled] [Ignore]
To Next Page
Loading...
Need help?
General
Weight and Dimensions
