Asus Maximus VII Formula Series - Page 102

3-14
Chapter 3: BIOS setup
Chapter 3
Channel B DIMM Control [Enable Both DIMMS]
Allows you to enable or disable the Channel B DIMM slots.
Conguration options: [Enable Both DIMMS] [Disable DIMM0] [Disable DIMM1]
[Disable Both DIMMS]
Scramble Setting [Optimized (ASUS)]
Set this item to [Optimized (ASUS)] to enhance system stability.
Conguration options: [Optimized (ASUS)] [Default (MRC)]
MCH Full Check [Auto]
Enable this item to enhance the stability of your system. Disable this item to enhance
the DRAM overclocking capability.
Conguration options: [Auto] [Enabled] [Disabled]
DQ Sense Amplifier [Auto]
Reducing usually helps overclocking and over-voltage.
Conguration options: [Auto] [+16] – [-29]
DQS Sense Amplifier [Auto]
Reducing usually helps overclocking and over-voltage.
Conguration options: [Auto] [+16] – [-29]
CMD Sense Amplifier [Auto]
Reducing usually helps overclocking and over-voltage.
Conguration options: [Auto] [+16] – [-29]
DRAM Swizzling Bit 0/1/2/3/4 [Auto]
Enabling these items helps overclocking.
Conguration options: [Auto] [Enabled] [Disabled]
DRAM Additional Training [Auto]
Reducing usually helps overclocking and over-voltage. Conguration options: [Auto]
[Enabled] [Disabled]
Skew Control
Transmitter Rising Slope [Auto]
Conguration options: [Auto] [Enabled] [Disabled]
Transmitter Falling Slope [Auto]
Conguration options: [Auto] [Enabled] [Disabled]
Transmitter Control Time [Auto]
Conguration options: [Auto] [Enabled] [Disabled]
Receiver Rising Slope [Auto]
Conguration options: [Auto] [Enabled] [Disabled]
Receiver Falling Slope [Auto]
Conguration options: [Auto] [Enabled] [Disabled]
Receiver Control Time [Auto]
Conguration options: [Auto] [Enabled] [Disabled]