Asus Maximus VII Ranger - USB 3.0 Boost

ASUS MAXIMUS VII RANGER
4-13
Chapter 4
Click to select a USB device
Click to enable the USB
device’s normal data
transfer rate
Click to enable UASP or
Turbo Mode to the USB
device for a faster data
transfer rate
USB 3.0 Boost
USB3.0BoosttechnologysupportsUASP(USBAttachedSCSIProtocol)thatautomatically
speedsupthetransferratesofyourUSBstoragedevices.
Launching USB 3.0 Boost
TolaunchUSB3.0Boost,clickortap onthetop-rightcorneroftheAISuite3main
menu,thenselect USB 3.0 Boost.
Using the USB 3.0 Boost
• USB3.0BoostautomaticallydetectstheUSB3.0devicesthatsupportUASP.Fora
listofUASP-supportedUSB3.0devices,visittheASUSwebsiteatwww.asus.com.
• ThedatatransferspeedvarieswithUSBdevices.Forahigherdatatransfer
performance,useaUSB3.0device.
EnsuretoconnectyourUSB3.0devicetotheUSB3.0portsthatsupportUSB3.0Boost.
RefertotheRear I/O connection section ofyouruserguideformoredetails.