Asus Maximus VII Ranger - Page 57

ASUS MAXIMUS VII RANGER
1-43
Chapter 1
5. CPU, chassis, and optional fan connectors (4-pin CPU_FAN; 4-pin CPU_OPT;
4-pin CHA_FAN1-3)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
• DO NOT forget to connect the fan cables to the fan connectors. Insufcient air ow
inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors!
• Ensure to fully insert the 4-pin CPU fan cable to the CPU fan connector.
The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.