Asus Maximus VIII Ranger - Graphics Configuration

ASUS MAXIMUS VIII RANGER
3-27
Chapter 3
Graphics Configuration
Allows you to select a primary display from graphical devices.
Primary Display [Auto]
[Auto] The primary display will be set to PCI-E when a PCI-E graphic
card is detected.
[IGFX] Force the primary display to be from the IGFX Graphics.
[PEG] Force the primary display to be from the PEG Graphics.
[PCIE] Force the primary display to be from the PCI-E graphic cards.
iGPU Multi-Monitor [Disabled]
Set this to enabled to empower both integrated and discrete graphics for multi-monitor
output.
Conguration options: [Enabled] [Disabled]
DMI/OPI Configuration
Allows you to congure the DMI/OPI settings.
DMI Max Link Speed [Auto]
Conguration options: [Auto] [Gen1] [Gen2] [Gen3]
PEG Port Configuration
Allows you to congure the PEG Port settings.
PCIEX16/X8_1
PCIEX16/X8_1 Link Speed [Auto]
Allows you to select the operating speed of the PCIEX16/X8_1 speed.
Conguration options:
[Auto] The system will automatically select the PCIEX16/X8_1 slot speed.
[Gen1] The PCIEX16/X8_1 slot will run at PCI-E 1.0 speed.
[Gen2] The PCIEX16/X8_1 slot will run at PCI-E 2.0 speed.
[Gen3] The PCIEX16/X8_1 slot will run at PCI-E 3.0 speed.
PCIEX8_2
PCIEX8_2 Link Speed [Auto]
Allows you to select the operating speed of the PCIEX8_2 speed.
Conguration options:
[Auto] The system will automatically select the PCIEX16/X8_1 slot speed.
[Gen1] The PCIEX8_2 slot will run at PCI-E 1.0 speed.
[Gen2] The PCIEX8_2 slot will run at PCI-E 2.0 speed.
[Gen3] The PCIEX8_2 slot will run at PCI-E 3.0 speed.