4-20
Chapter 4: Software Support
Chapter 4
Ai Charger+
Ai Charger+ allows you to fast-charge your portable BC 1.1* mobile devices on your
computer’s USB port three times faster than the standard USB devices**.
Launching Ai Charger+
To launch Ai Charger+, click on the left of the AI Suite 3 main menu, then select Ai
Charger+.
Ai Charger+ is available only in selected motherboard models.
Ai Charger+ screen
Tick to enable or
disable Ai Charger+
Click to apply the
selection
• * Check the manufacturer if your USB device is a Battery Charging Specication 1.1
(BC 1.1) compliant or compatible device.
• ** Actual charging speeds may vary depending on the charging rate and specications
of your USB device.
• To ensure normal charging function, disconnect and reconnect your USB device every
time you enable or disable Ai Charger+.
• Ai Charger+ does not support USB hubs, USB extension cables, and generic USB
cables.
To Next Page
Loading...
