Asus Motherboard P5LD2 - Page 82

4-22 Chapter 4: BIOS setup
The following item appears only when the AI Overclocking item is set to
[AI NOS].
N.O.S. Mode [Auto]
Sets the Non-Delay Overclocking System mode. Setting to [Auto] loads the
optimum sensitivity and overclocking percentage setting.
Conguration options: [Auto] [Manual]
The following items appear only when the N.O.S. Mode item is set to
[Manual].
Sensitivity [Sensitive]
Allows you to select the sensitivity of the AI NOS sensor. Refer to the
description of the conguration options below.
Normal – overclocking is activated depending on the CPU loading.
Sensitive – overclocking is activated even on a light CPU loading.Less
Sensitive – activates overclocking only when the CPU loading is heavy.
Target Freqency [Overclock 3%]
Allows you to select the ma ximum overclocking percentage when AI
NOS is activated. Conguration options: [Overclock 3%] [Overclock 5%]
[Overclock 7%] [Overclock 10%] [Overclock 15%] [Overclock 20%]
[Overclock 30%]
The following item appears only when the AI Overclocking item is set to
[Overclock Prole].
Overclock Options [Overclock 5%]
Allows you to overclock the CPU speed through the available preset values.
Conguration options: [Overclock 5%] [FSB888/DDR2-667]
[Overclock 10%] [FSB960/DDR2-800]
[Overclock 15%] [FSB1280/DDR2-800]
[Overclock 20%] [FSB1333/DDR2-667]
[Overclock 30%] [FSB1333/DDR2-834]