Asus Motherboard P5LD2 - Page 90

4-30 Chapter 4: BIOS setup
Detecting Device Time [Quick Mode]
Sets the time the ITE8211F IDE controller detects devices connected
to the IDE connectors. This item appears only when the ITE8211F
Controller is set to IDE Mode.
Conguration options: [Standard Mode] [Quick Mode]
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Conguration options: [Disabled] [3F8/IRQ4] [2F8/IRQ3] [3E8/IRQ4]
[2E8/IRQ3]
Parallel Port Address [378]
Allows you to select the Parallel Port base addresses.
Conguration options: [Disabled] [378] [278] [3BC]
Parallel Port Mode [ECP]
Allows you to select the Parallel Port mode.
Conguration options: [Normal] [Bi-directional] [EPP] [ECP]
ECP Mode DMA Channel [DMA3]
Appears only when the Parallel Port Mode is set to [ECP].
This item allows you to set the Parallel Port ECP DMA.
Conguration options: [DMA0] [DMA1] [DMA3]
Parallel Port IRQ [IRQ7]
Conguration options: [IRQ5] [IRQ7]
Onboard Game/MIDI Port [Disabled]
Allows you to select the Game Port address or to disable the port.
Conguration options: [Disabled] [200/300] [200/330] [208/300]
[208/330]