Asus P4GE-MX - Page 50

2-18 Chapter 2: BIOS information
On-Chip Secondary PCI IDE [Enabled]
Disables or enables the On-chip Secondary PCI IDE support.
Configuration options: [Disabled] [Enabled]
Primary Master UDMA [Auto]
Primary Slave UDMA [Auto]
Secondary Master UDMA [Auto]
Secondary Slave UDMA [Auto]
These items allow you to automatically set or disable the primary IDE UDMA
capability, which improves transfer speeds and data integrity for compatible IDE
devices. Configuration options: [Disabled] [Auto]
USB Controller [Enabled]
Disables or enables the USB controller.Configuration options: [Disabled] [Enabled]
USB 2.0 Controller [Enabled]
Disables or enables the USB 2.0 controller.
Configuration options: [Disabled] [Enabled]
USB Keyboard Support [Enabled]
Disables or enables the USB keyboard support.
Configuration options: [Disabled] [Enabled]
USB Mouse Support [Enabled]
Disables or enables the USB mouse support.
Configuration options: [Disabled] [Enabled]
AC97 Audio [Auto]
Disables or set to auto-detect if there are any AC’97-compliant devices installed.
Configuration options: [Disabled] [Auto]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
These fields allow you to set the address for the onboard serial connectors.
Configuration options: [Disabled] [3F8/IRQ4] [2F8/1RQ3] [3E8/IRQ4] [2E8/IRQ3]
[Auto]
Onboard Parallel Port [378/IRQ7]
This field allows you to set the address of the onboard parallel port connector.
Configuration options: [Disabled] [378/IRQ7] [278/IRQ5] [3BC/IRQ7]