Asus P5AD2 Deluxe - Page 132

5-225-22
5-225-22
5-22
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software supportChapter 5: Software support
Chapter 5: Software support
Creating a RAID 1 set (Mirrored)Creating a RAID 1 set (Mirrored)
Creating a RAID 1 set (Mirrored)Creating a RAID 1 set (Mirrored)
Creating a RAID 1 set (Mirrored)
To create a RAID 1 set:
1. From the Silicon Image configuration utility main menu, select
CreateCreate
CreateCreate
Create
RAID set RAID set
RAID set RAID set
RAID set then press <Enter>. The following sub-menu appears.
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
RAID0
RAID1
RAID10
SPARE DRIVE
2. Select
RAID 1RAID 1
RAID 1RAID 1
RAID 1 then press <Enter> to display the following.
MAIN MENU
Auto configuration
Manual configuration
3. Select your desired method of configuration.
Auto configurationAuto configuration
Auto configurationAuto configuration
Auto configuration
a. Select Auto Configuration then press <Enter>.
b. The utility prompts a confirmation message. Press <Y> to confirm
or <N> to return to the configuration Main Menu.
• Auto-configuration creates a RAID 1 set without backup copy.
• When migrating a single hard disk drive to a RAID 1 set, use of the
Manual configuration is recommended.