Need help?Do you have a question about the Asus P5G41-M SI and is the answer not in the manual?
General| Form Factor | Micro ATX |
|---|---|
| Chipset | Intel G41 |
| CPU Socket Type | LGA 775 |
| Max CPU TDP | 95W |
| Maximum Memory | 8GB |
| Storage Interface | 4 x SATA 3Gb/s |
| CPU Support | Intel Core 2 Quad, Core 2 Duo, Pentium, Celeron |
| Memory Slots | 2 |
| Memory Speed | 800 MHz |
| Expansion Slots | 1 x PCIe x16, 2 x PCI |
| USB Ports | 8 x USB 2.0 |
| Back Panel I/O Ports | 1 x VGA, 4 x USB 2.0, 1 x LAN, 3 x Audio Jacks |
Take note of the following precautions before you install motherboard components or change any motherboard settings.
Precautions to prevent electric shock hazards during system operation and maintenance.
Guidelines for safe installation and operation of the motherboard.
Details the CPU socket, supported processors, and technologies.
Lists chipsets and details system memory architecture and capacity.
Describes expansion slots and integrated graphics capabilities.
Details the CPU socket and compatible processors.
Explains how to install memory modules for dual-channel operation.
Guidance on installing OS and recommended service packs.
Overview of BIOS management and update procedures.
Details on installing and using the ASUS Update utility.
Explains how to enter the BIOS setup utility.
Explains the main menu items like Main, Advanced, Power, Boot, Tools, Exit.
Allows changing CPU-related settings like ratio, C1E, and virtualization.
Settings for Memory Remap, DRAM Timing, and Graphics Adapter.
Allows changing USB functions, controllers, and legacy support.
Configures system suspend states and ACPI support.
Settings for AC power loss recovery and RTC alarm wake-up.
Displays CPU/MB temperature, fan speeds, and voltages.
Specifies the boot device priority sequence.
Options for Quick Boot, Full Screen Logo, and NumLock state.
Options to set supervisor and user passwords.
Allows running the ASUS EZ Flash 2 utility for BIOS updates.
Exits the setup utility after saving changes to CMOS RAM.
Exits the setup utility without saving changes.
Loads the default values for BIOS parameters.
To Next Page
