Asus P5K DELUXE - AHCI Configuration

4-14 Chapter 4: BIOS setup
Intel Robson Technology [Disabled]
Allows you to enable or disable Intel Robson Technology.
Conguration option: [Disabled] [Enabled]
The Intel Robson Technology appears only when you set the item Congure
SATA as to [AHCI].
Hard Disk Write Protect [Disabled]
Disables or enables device write protection. This will be effective only if the device
is accessed through BIOS. Conguration option: [Disabled] [Enabled]
SATA Detect Time Out (Sec) [35]
Selects the time out value for detecting ATA/ATAPI devices.
Conguration options: [0] [5] [10] [15] [20] [25] [30] [35]
4.3.7 AHCI Conguration
This menu is the section for AHCI conguration. It appears only when you set the
item Congure SATA as from the sub-menu of SATA Conguration to [AHCI].
AHCI Settings
AHCI Port1 [Not Detected]
AHCI Port2 [Not Detected]
AHCI Port3 [Not Detected]
AHCI Port4 [Not Detected]
AHCI Port5 [Not Detected]
AHCI Port6 [Not Detected]
While entering setup,
BIOS auto detects the
presence of IDE devices.
This displays the status
of auto detection of
IDE devices.
ACHI Port1~6 [XXXX]
Displays the status of auto-detection of SATA devices.
AHCI Port1
Device :Not Detected
SATA Port1 [Auto]
Select the type of
devices connected to
the system.
SATA Port1 [Auto]
Allows you to select the type of device connected to the system.
Conguration options: [Auto] [Not Installed]