Asus P5P41T LE - CPU Configuration

ASUS P5P41T LE 2-11
NB Over Voltage [Auto]
Manually set Northbridge chipset over voltage and each step is 6.25mv. Press <+> / <-> to
adjust the value. Valid value is from 1.12500V to 1.51875V.
CPU VTT [1.2V]
Allows you to adjust CPU VTT over voltage and each step is 6.25mv. Valid value is from
1.20000V to 1.59375V.
SB 1.5V Voltage [1.5V]
Manually set Southbridge Chipset Voltage. Conguration options: [1.5V] [1.6V]
Setting a very high voltage may damage the component permanently, and setting a very
low voltage may cause the system to become unstable.
2.4.2 CPU Conguration
The items in this menu show the CPU-related information that the BIOS automatically
detects.
Ratio CMOS Setting [Auto]
Sets the ratio between CPU core clock and the FSB frequency. Press <+> / <-> to adjust the
value.
If an invalid ratio is set in CMOS, then the actual and set values may differ.
C1E Support [Enabled]
Allows you to enable or disable C1E Support. Conguration options: [Disabled] [Enabled]
Max CPUID Value Limit [Disabled]
Setting this item to [Enabled] allows legacy operating systems to boot even without support
for CPUs with extended CPUID functions. Conguration options: [Disabled] [Enabled]
Intel
®
Virtualization Tech [Enabled]
Enables or disables Intel
®
Virtualization Technology. Virtualization enhanced by Intel
®
Virtualization Technology allows a platform to run multiple operating systems and applications
in independent partitons. With virtualization, one computer system can function as multiple
virtual systems. Conguration options: [Enabled] [Disabled]
CPU TM function [Enabled]
Enables or disables Intel
®
CPU Thermal Monitor (TM) function, a CPU overheating
protection function. When enabled, the CPU core frequency and voltage are reduced when
the CPU overheats. Conguration options: [Disabled] [Enabled]
Auto PSI [Enabled]
Allows you to eanable or disable the Auto PSI mode.
Conguration options: [Disabled] [Enabled]