EasyManua.ls Logo

Asus P5Q SE2 - Page 54

Asus P5Q SE2
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-16 Chapter 2: BIOS setup
CPU Voltage [Auto]
Allows you to set the CPU VCore voltage. The values range from 0.8500V to 1.7500V with a
0.00625V interval. Conguration options: [Auto]
Refer to the CPU documentation before setting the CPU Vcore voltage. Setting a high
VCore voltage may damage the CPU permanently, and setting a low VCore voltage may
make the system unstable.
FSB Termination Voltage [Auto]
Allows you to set the front side bus termination voltage. The values range from 1.20V to
1.50V with a 0.10V interval.
The minimum value becomes 1.10V and the maximum value becomes 1.40V when a 45nm
CPU is detected.
Memory Voltage [Auto]
Allows you to set the memory voltage manually or Auto. Use the <+> and <-> keys to adjust
the value. The value ranges from 1.80V to 2.20V with a 0.10V interval.
North Bridge Voltage [Auto]
Allows you to set the NB voltage manually or Auto. Use the <+> and <-> keys to adjust the
value. The value ranges from 1.10V to 1.40V with a 0.10V interval.
Setting a very high voltage may damage the component permanently, and setting a very
low voltage may cause the system to become unstable.
South Bridge Voltage [Auto]
Allows you to set the SB voltage. The value ranges from 1.50V to 1.70V with a 0.20V interval.
CPU GTL Reference [Auto]
Allows you to set the CPU GTL voltage reference. Conguration options: [Auto] [0.667x]
[0.65x] [0.63x] [0.615x]
CPU Spread Spectrum [Auto]
Allows you to set the CPU spread spectrum. Conguration options: [Auto] [Disabled]
PCIE Spread Spectrum [Auto]
Allows you to set the PCIE spread spectrum. Conguration options: [Auto] [Disabled]
CPU Clock Skew [Auto]
Allows you to set the CPU clock skew. Conguration options: [Auto] [Normal] [Delay 75ps]
[Delay 150ps] [Delay 225ps] [Delay 300ps] [Delay 375ps] [Delay 450ps] [Delay 525ps]
[Delay 600ps] [Delay 675ps] [Delay 750ps] [Delay 825ps] [Delay 900ps] [Delay 975ps]
[Delay 1050ps] [Delay 1100ps]
NB Clock Skew [Auto]
Allows you to set the NB clock skew. Conguration options: [Auto] [Normal] [Delay 75ps]
[Delay 150ps] [Delay 225ps] [Delay 300ps] [Delay 375ps]

Table of Contents

Related product manuals