2-18 Chapter 2: Hardware information
2.5.7 Connect Thermal sensor cable
Follow the steps below to connect the thermal sensor cable to the connector on
your motherboard.
1. Locate the TR1 connector on the
motherboard.
2. Connect the thermal sensor cable to
the connector.
3. Place the other end of the thermal sensor cable to the device you would like
to monitor temperature.
2.5.8 Installing the audio card
1. Locate the PCI Express x8 slot on
the motherboard.
2. Align the card connector with the
slot and press rmly until the card
sits on the slot completely.
To Next Page
Loading...
