Asus P8B WS - System Agent Configuration

3-16 Chapter 3: BIOS setup
 
Main
Ai Tweaker
Advanced Monitor Boot Tool
Exit
Select which graphics controller to use as
the primary boot device.
Back Advanced\ System Agent Conguration >
EFI BIOS Utility - Advanced Mode
System Agent Conguration
Initiate Graphic Adapter PEG/PCI
iGPU Memory 64M
Render Standby Enabled
iGPU Multi-Monitor Disabled
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the desired graphics controller as the primary boot device.
Conguration options: [iGPU] [PCI/iGPU] [PCI/PEG] [PEG/PCI]
iGPU Memory [64M]
Allows you to select the iGPU share memory size.
Conguration options: [32M [64M] [96M] [128M]
Render Standby [Enabled]
Allows you to enable or disable the Render Standby by the internal graphics
device. Conguration options: [Disabled] [Enabled]
iGPU Multi-Monitor [Disabled]
Allows you to enable or disable the internal graphics device multi-monitor support
for the add-on VGA devices. Conguration options: [Disabled] [Enabled]