Asus P8Q67-M DO - USB Configuration; ME Subsystem; AMT Configuration

2-20ASUS P8Q67-M DO Series
The USB Devices item shows the auto-detected values. If no USB device is detected, the
item shows None.
Legacy USB Support [Enabled]
[Enabled] Enables the support for USB devices on legacy operating systems (OS).
[Disabled] The USB devices can be used only for the BIOS setup program.
[Auto] Allows the system to detect the presence of USB devices at startup. If
detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled.
Legacy USB3.0 Support [Enabled]
This item appears only on P8Q67-M DO/USB3/TPM.
[Enabled] Enables the support for USB 3.0 devices on legacy operating systems
(OS).
[Disabled] Disables the function.
EHCI Hand-off [Disabled]
[Enabled] Enables the support for operating systems without an EHCI hand-off
feature.
[Disabled] Disables the function.
2.5.8 ME Subsystem
The items in this menu allow you to change the Intel
®
Management Engine (ME) feature.
ME Subsystem [Enabled]
Allows you to enable or disable accessing the ME subsystem. Conguration options:
[Enabled] [Disabled]
End of Post Message [Enabled]
This item appears only when you set the ME Subsystem item to [Enabled]. Conguration
options: [Enabled] [Disabled]
Execute MEBx [Enabled]
Allows you to enable or disable the Intel
®
Management Engine BIOS Extension (MEBx)
feature. Conguration options: [Enabled] [Disabled]
2.5.9 AMT Conguration
The items in this menu allow you to change the Intel
®
Active Management Technology (AMT)
feature.
AMT [Enabled]
Allow you to enable or disable the Intel
®
Active Management Technology (AMT) feature.
Conguration options: [Enabled] [Disabled]
2.5.7 USB Conguration
The items in this menu allow you to change the USB-related features.