Asus P8Z68-V LX - Page 19

ASUS P8Z68-V LX 1-7
1. Click Accelerate to launch Smart
Response Technology settings.
2. a. Select the SSD you want to use to
accelerate your storage system.
b. Select the size allocated for SSD
caching.
c. Select which HDD for caching.
d. Enhanced mode:WRITE THROUGH,
write to SSD and HDD at the same
time.
Maximized mode:WRITE BACK,
write to SSD and write back to HDD in
a later time.
3. Select Disable Acceleration to disable
this function and select Change Mode to
switch acceleration mode to Enhanced/
Maximus.
• Only Intel
®
internal SATA ports (gray and blue) support Intel
®
Smart Response
Technology.
• You need at least one SSD (>18.6GB) and one HDD as a set to enable Intel
®
Smart
Response Technology. A single SSD can only be assigned to one HDD for caching.
• The maximum caching size on the SSD is 64GB. If the SSD exceeds 64GB, storage
capacity left out of caching can still be identied by the system for normal storage.
• Be sure to disable the acceleration function of Intel
®
Smart Response Technology under
OS when applying the actions below:
– Removing or replacing the SSD
– Updating IRST 10.5 driver
– Updating BIOS
• If you want to restore the OS, go to BIOS Option ROM utility and select Acceleration
Options to disable Intel
®
Smart Response Technology.
• The performance of Intel
®
Smart Response Technology varies by SSD.