2-48
Chapter 2: Hardware information
Chapter 2
2.3.10 Wireless and Bluetooth Module Installation
1. Unfasten screw B from the Wireless & Bluetooth
Module.
B
2. Align the Module to the BT4 connector (the second item at the motherboard's back
IO area). Connect the pins and make sure the screw hole matches the hole on the
motherboard.
3. Be sure to secure the Module to the motherboard
by properly fastening screw B from underneath the
motherboard.
B
1. The module MUST be screwed to the motherboard to avoid loosening during use.
2. Handle the screwdriver with care to avoid scratching the motherboard and causing
defects.
Ensure to disconnect the power supply unit from the motherboard before installing/
uninstalling the Wireless and Bluetooth Module.
Wi-Fi 802.11a/b/g/n, Bluetooth v4.0/3.0 + HS
To Next Page
Loading...
