3-26 Chapter 3: BIOS setup
Chapter 3
DRAM CTRL REF Voltage on CHB [Auto]
Allows you to set the DRAM CTRL REF Voltage on CHB. The values range from 0.3950x to
0.6300x with a 0.005x interval.
DRAM DATA REF Voltage on CHB [Auto]
Allows you to set the DRAM DATA REF Voltage on CHB. The values range from 0.3950x to
0.6300x with a 0.005x interval.
DRAM CTRL REF Voltage on CHC [Auto]
Allows you to set the DRAM CTRL REF Voltage on CHC. The values range from 0.3950x to
0.6300x with a 0.005x interval.
DRAM DATA REF Voltage on CHC [Auto]
Allows you to set the DRAM DATA REF Voltage on CHC. The values range from 0.3950x to
0.6300x with a 0.005x interval.
DRAM CTRL REF Voltage on CHD [Auto]
Allows you to set the DRAM CTRL REF Voltage on CHD. The values range from 0.3950x to
0.6300x with a 0.005x interval.
DRAM DATA REF Voltage on CHD [Auto]
Allows you to set the DRAM DATA REF Voltage on CHD. The values range from 0.3950x to
0.6300x with a 0.005x interval.
DRAM Read REF Voltage on CHA [Auto]
Allows you to set the DRAM Read Reference Voltage on Channel A. The values range from
0.3850x to 0.6150x with a 0.005x interval. Different ratio might enhance DRAM overclocking
ability.
DRAM Read REF Voltage on CHB [Auto]
Allows you to set the DRAM Read Reference Voltage on Channel B. The values range from
0.3850x to 0.6150x with a 0.005x interval. Different ratio might enhance DRAM overclocking
ability.
DRAM Read REF Voltage on CHC [Auto]
Allows you to set the DRAM Read Reference Voltage on Channel C. The values range from
0.3850x to 0.6150x with a 0.005x interval. Different ratio might enhance DRAM overclocking
ability.
DRAM Read REF Voltage on CHD [Auto]
Allows you to set the DRAM Read Reference Voltage on Channel D. The values range from
0.3850x to 0.6150x with a 0.005x interval. Different ratio might enhance DRAM overclocking
ability.
To Next Page
Loading...
