Asus PA328 Series - Monitor Introduction; Front View Controls

1-2 Chapter 1: Product introduction
1.3 Monitorintroduction
1.3.1 Frontview
Menu
Close
Input Select
Quick Fit
Brighness
Contrast
Standard Mode
DisplayPort 3840x2160@60Hz
6
2
7
4
5
3
1
1. Menu (5-way) button:
• Press this button to enter the OSD menu.
• Enacts the selected OSD menu items.
• Increases/Decreases values or moves your selection up/down/left/right.
2.
Close button:
• Exits the OSD menu.
• Toggles the Key Lock function between on and off with a long press for
5 seconds.
3.
Input select button:
• Selects an available input source.
Press button (Input Select button) to display HDMI-1/MHL, HDMI-
2, HDMI-3, DisplayPort, mini DisplayPort signals after you connect HDMI/
DisplayPort/Mini DisplayPort cable with the monitor.
4. QuickFit button:
• This is a hotkey to activate the QuickFit function designed for alignment.
• The QuickFit function contains 8 pages of common grid patterns, paper
sizes, and photo sizes. (Please refer to 1.3.3 QuickFit Function).
5.
Shortcut
• Default: Brightness hotkey
• To change the hotkey function, go to the Shortcut > Shortcut 1 menu.