3-10 Chapter 3: OSD (On-Screen Display) menu
* Adaptive-Sync can only be activated within 48Hz ~ 75Hz.
* For supported GPUs, minimum PC system and driver requirements, please
contact the GPU manufactures.
To activate this function, you need to do the following: turn off PIP/PBP, set
Aspect Control to Full, set DisplayPort Stream to DisplayPort 1.2.
• USB Charging:
* “On During Standby” allows the USB downstream ports to
charge external devices when the monitor is turned on or in
standby mode.
* “Off During Standby” allows the USB downstream ports to
charge external devices only when the monitor is turned on.
Only USB downstream port BC1.2 is able to charge without upstream cable
connected.
• OSD Setup:
* Adjusts the OSD timeout from 10 to 120 seconds.
* Enables or disables the DDC/CI function.
* Adjusts the OSD background from opaque to transparent.
• DisplayPort Stream: Compatibility with graphic card. Select DisplayPort
1.1 or DisplayPort 1.2 by graphic card DP version.
To activate this function, you need to do the following: turn off Adaptive-Sync.
• Key Lock: To disable all function keys. Push the 5-way button down for
over 5 seconds to cancel the key lock function.
• Power Indicator: Turns the power LED indicator on/off.
• Language: There are 22 languages for your selection, including English,
French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech,
Croatian, Polish, Romanian, Hungarian, Turkish, Simplied Chinese,
Traditional Chinese, Japanese, Korean, Thai, Indonesian, Persian,
Ukrainian.
• Information: Shows the monitor information.
• All Reset: “Yes” allows you to restore the default settings.
To Next Page
Loading...
