1-2
Chapter 1: Product Introduction
1.3 Monitor introduction
1.3.1 Front view
Close
Input Select
QuickFit
Menu
Self Calibration
HDR
ProArt Preset
1. Menu (5-way) button:
• Enter the OSD menu.
• Enact the selected OSD menu items.
• Increase/Decrease values or move your selection up/down/left/right.
2. Close button:
• Exit the OSD menu.
• Toggle the Key Lock function between on and off with a long press for
5 seconds.
3. Input Select button:
• Smart switch to the next existed input source.
4. QuickFit Plus Button:
• This is a hotkey to activate the QuickFit Plus function designed for
alignment.
• The QuickFit Plus function contains 4 types of alignment patterns.
(Please refer to 1.3.3 QuickFit Plus Function).
To Next Page
Loading...
