Asus PA32DC - ProArt Palette Color Settings

3-5
ASUS PA32DC OLED Monitor
2. ProArt Palette
Set a desired color setting from this menu.
To activate this function, you need to disable the Ambient Effect function.
ASUS PA32DC
60Hz3840x2160@HDMI-1Standard Mode
ProArt Palette
Brightness
Contrast
Saturation
Hue
Color Temp.
Gamma
Color
Black Level
Color Reset
• Brightness: The adjusting range is from 0 to 100.
When the HDR function is enabled, the maximum brightness level is
automatically set to 500nits as default.
• Contrast: The adjusting range is from 0 to 100.
• Saturation: The adjusting range is from 0 to 100.
• Hue: Shifts the image color between green and purple.
• Color Temp.: Contains 5 modes including 9300K, 6500K, 5500K, 5000K,
and P3-Theater.
When the ProArt Preset setting is set to DCI-P3 Mode, only 6500K and
P3-Theater options are available.
• Gamma: Allows you to set the color mode to 1.8, 2.0, 2.2, 2.4, or 2.6.
• Color: Configures the color settings.
» Six-axis Hue: Adjusts the six-axis hue settings for the red, green,
blue, cyan, magenta, or yellow color.
» Six-axis Saturation: Adjusts the six-axis saturation settings for the
red, green, blue, cyan, magenta, or yellow color.
» Gain: Adjusts the gain levels for the red, green, or blue color.
» Offset: Adjusts the black level offset values for the red, green, or
blue color.
• Black Level: Adjusts the initialized 1st signal level of darkest gray level.