3-8
Chapter 3: General Instruction
5. PIP/PBP Setting
The PIP/PBP Setting allows you to open up another sub-window connected
from another video source besides the main-window from your original video
source. By activating this function, the monitor displays up to 2 pictures from
different video sources.
To activate this function, you need to disable the HDR function.
PIP/PBP Setting
PIP/PBP Mode
PIP/PBP Source
Color Setting
PIP Size
ASUS PA32DC
60Hz3840x2160@HDMI-1Standard Mode
• PIP/PBP Mode: Selects PIP, PBP, PBP x 3, or PBP x 4 function, or turn
it off.
• PIP/PBP Source: Selects the video input source between HDMI-1, HDMI-
2, HDMI-3, DisplayPort, and USB Type-C. The table below shows the
input source combinations.
Sub-window
Main-window
HDMI-1 HDMI-2 HDMI-3 DisplayPort USB Type-C
HDMI-1 Yes Yes Yes Yes Yes
HDMI-2 Yes Yes Yes Yes Yes
HDMI-3 Yes Yes Yes Yes Yes
DisplayPort Yes Yes Yes Yes Yes
USB Type-C Yes Yes Yes Yes Yes
• Color Setting: Selects an individual ProArt Preset Mode for the selected
PIP/PBP source. (Up to 2 ProArt Preset modes can be chosen)
• PIP Size: Adjusts the PIP size to Small, Middle, or Large. (Only available
for the PIP mode)
To Next Page
Loading...
