ASUS Mini PC PN63-S1 Series
25
Turning o your Mini PC
If your Mini PC is unresponsive, press and hold the power button for at least
four (4) seconds until your Mini PC turns o.
Putting your Mini PC to sleep
To put your Mini PC in Sleep mode, press the power button once.
Entering BIOS Setup
BIOS (Basic Input and Output System) stores system hardware settings that
are needed for system startup on the Mini PC.
Under normal circumstances, the default BIOS settings apply to most
conditions to ensure optimal performance. Do not change the default BIOS
settings except in the following circumstances:
• An error message appears on the screen during the system bootup and
requests you to run BIOS Setup.
• You have installed a new system component that requires further BIOS
settings or update.
WARNING! Inappropriate BIOS settings may result in instability or
boot failure. We strongly recommend that you change the BIOS
settings only with the help of a trained service personnel.
To Next Page
Loading...
Need help?
General
