Asus PN80 - Installing the M.2 SSD

PN Series 37
Your Mini PC comes with two M.2 slots, each M.2 SSD requires the
installation of a heatsink before installing the M.2 SSD to the M.2 slots. The
heatsink diers between the two M.2 slots, ensure to install the correct
heatsink.
To install an M.2 SSD to M.2_PCH_1(SKT3) slot:
1. Place the M.2 SSD into the bottom piece of the heatsink module.
2. Place the top piece of the heatsink module onto the top side of the
M.2 SSD, and secure it using four (4) screws.
3. Align and insert the M.2 SSD into its slot inside the Mini PC, then
gently push down the M.2 SSD on top of the screw hole and fasten it
using one of the bundled 3mm round screws.
Installing the M.2 SSD