Asus RAMPAGE IV BLACK EDITION - Page 107

ASUS RAMPAGE IV BLACK EDITION
3-17
Chapter 3
Extreme OV [Disabled]
This item is set to [Disabled] by default to protect the CPU from being overheated. Set this
item to [Enabled] to choose a higher voltage to overclock, but doing so might decrease CPU
life. Conguration options: [Disabled] [Enabled]
BCLK Skew [Auto]
Reduce the value to improve BCLK margin.
Conguration options: [Auto] [-5] – [+3]
CPU VCORE Voltage [Manual Mode]
[Manual Mode] Allows you to set a xed CPU voltage.
[Offset Mode] Allows you to set the Offset voltage.
This item appears only when you set the CPU VCORE Voltage item to [Manual Mode]
CPU VCORE Manual Voltage [Auto]
This item allows you to set a xed CPU voltage. The values range from 0.800V to
2.100V with a 0.005V interval.
This item appears only when you set the CPU VCORE Voltage item to [Offset Mode].
Offset Mode Sign [+]
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU VCORE Offset Voltage [Auto]
This item allows you to set the Offset voltage. The values range from 0.005V to 0.635V
with a 0.005V interval.
VTT CPU Voltage [Auto]
Allows you to set the VTT CPU voltage. The values range from 0.8000V to 1.7000V with a
0.00625V interval.
Refer to the CPU documentation before setting the CPU voltage. Setting a high voltage
may damage the CPU permanently, and setting a low voltage may make the system
unstable.
2nd VTTCPU Voltage [Auto]
Allows you to set the second VTTCPU voltage. The values range from 0.80642V to 1.70538V
with an increment of 0.00661V.