Need help?Do you have a question about the Asus MAXIMUS IV GENE-Z and is the answer not in the manual?
General| ECC | No |
|---|---|
| Non-ECC | Yes |
| Memory channels | Dual-channel |
| Number of memory slots | 4 |
| Maximum internal memory | 32 GB |
| Supported memory clock speeds | 1066, 1200, 1300, 1333, 1600, 1800, 1866, 2133, 2200 MHz |
| System bus rate | 5 GT/s |
| Processor socket | LGA 1155 (Socket H2) |
| Processor manufacturer | Intel |
| Compatible processor series | Intel Core i3, Intel Core i5, Intel Core i7 |
| USB 2.0 connectors | 2 |
| Number of EATX power connectors | 1 |
| Number of Parallel ATA connectors | 0 |
| Headphone outputs | 6 |
| USB 2.0 ports quantity | 8 |
| Component for | PC |
| Power source type | ATX |
| Motherboard chipset | Intel Z68 |
| Audio output channels | 7.1 channels |
| Motherboard form factor | micro ATX |
| Compatible operating systems | Windows XP, Vista, 7 32/64-bit |
| PCI Express slots version | 2.0 |
| Maximum graphics card memory | 1759 MB |
| Manageability features | WfM 2.0, DMI 2.0, WOL by PME, WOR by PME, PXE |
| RAID levels | 0, 1, 5, 10 |
| Networking features | 10/100/1000 Mbit/sec |
| Ethernet interface type | Gigabit Ethernet |
| BIOS type | EFI |
| ACPI version | 2.0a |
| BIOS memory size | 64 Mbit |
Weight and Dimensions| Width | - mm |
|---|
Provides precautions to prevent electrical shock hazards during system handling and operation.
Lists exclusive features designed for overclocking and performance tuning.
Provides essential precautions before installing hardware or changing settings.
Details the CPU socket and installation procedure for Intel® 2nd Generation processors.
Explains the DIMM slots and provides guidance on installing DDR3 memory modules.
Provides step-by-step instructions for installing the CPU into the socket.
Guides users through the process of installing memory modules into DIMM slots.
Guides users through the initial system startup and POST process.
Explains how to access and navigate the BIOS setup utility.
Details the Extreme Tweaker menu for overclocking and performance-related settings.
Details CPU-related settings and automatic detection information.
Allows configuration of SATA devices, including modes like AHCI and RAID.
Allows modification of system boot options, priorities, and startup behavior.
Utility for updating the motherboard BIOS using a USB flash drive.
Covers procedures and precautions for updating the motherboard BIOS.
Utility for updating BIOS via USB flash drive without bootable media.
Details the integrated AI Suite II for managing system utilities and monitoring.
Explains DIGI+ VRM for adjusting voltage and frequency modulation for stability.
Covers TurboV EVO for manual CPU frequency and voltage adjustment in Windows.
Details FAN Xpert for adjusting CPU and chassis fan speeds based on temperature.
Allows adjustment of memory timings to optimize system performance.
Explains SATA RAID solutions supported by the motherboard, including RAID levels.
Guides on how to enable RAID functionality within the BIOS setup.
Details the process of installing RAID drivers during OS installation.
Covers installation and configuration of ATI CrossFireX for multi-GPU setups.
Provides steps for physically installing multiple CrossFireX graphics cards.
To Next Page