Asus Rampage IV Extreme - USB BIOS Flashback

ROG RAMPAGE IV EXTREME 3-51
Chapter 3
3.10.5 USB BIOS Flashback
The USB BIOS Flashback allows users to update BIOS without entering BIOS or the
operating system by using a USB ash disk drive under standby power.
1. Download the latest BIOS program le from the ASUS website.
2. Extract and rename the BIOS image le to R4E.ROM.
3. Copy R4E.ROM to the root directory of the USB ash disk drive.
4. Turn off the system and connect the USB ash drive to the ROG Connect port (the
white USB 2.0 port) at the rear panel of the motherboard.
5. Hold the ROG Connect button until the
BIOS LED begins to blink, then release.
6. Wait until the LED stops to blink, then
the BIOS ash is completed.
• This function can only support devices such as a USB ash disk with FAT32/16 format
and single partition.
• DO NOT unplug the power of the system while updating the BIOS to prevent system
boot failure!