ROG RAMPAGE IV EXTREME 2-59
Chapter 2
4. Plug in the DVI male connector of
the OC Key device to the DVI female
connector on the display card.
5. Plug in the DVI male connector from the
monitor to the OC Key device.
To use the OC Key device
1. With the system powered ON, press and hold the
ROG Connect
button on the rear
panel for three seconds to activate the OC Key function.
2. The
OSD Poster
screen apperas, including the
OSD Monitor
and
OSD TweakIt
menus.
OSD MONITOR
CPU CPU VSA CPU RATIO X BCLK CPU FREQUENCY
0.77624(V) 0.88266(V) 39.0 x 100.0 3900.0 (MHz)
DRAM AB DRAM CD CPU VTT CPU TEMP
1.48362(V) 1.49614(V) 1.10802(V) 38(C)
REPUBLIC OF
GAMERS
OSD TWEAKIT
OSD MONITOR
SETTING
3. Use the <Up>, <Down>, <Left> and <Right> to move the highlighted item, use the
<Enter> key to enter an item, use the <ESC> key to exit an item, and use the <F10>
key to save settings.
To Next Page
Loading...
