Asus Rampage IV Extreme - Page 96

3-10 Chapter 3: BIOS setup
Chapter 3
tCCD [Auto]
Conguration options: [Auto] [0 DRAM Clock] – [7 DRAM Clock]
Latency Timings
DRAM RTL (CHA/B/C/D D0/1 R0/1 [Auto])
Conguration options: [Auto] [Advance 14 Clock] [Advance 12 Clock] – [Advance 4
Clock] [Advance 2 Clock] [Normal] [Delay 2 Clock] [Delay 4 Clock] – [Delay 12 Clock]
[Delay 14 Clock]
DRAM IOL (CHA/B/C/D D0/1 R0/1 [Auto])
Conguration options: [Auto] [Advance 14 Clock] – [Advance 1 Clock] [Normal]
[Delay 1 Clock] – [Delay 14 Clock]
others
DRAM CLK Period
Conguration options: [Auto] [1 DRAM Clock] – [7 DRAM Clock]
DIGI+ Power Control
Do not remove the thermal module while changing the DIGI+ Power Control related
parameters . The thermal conditions should be monitored.