Asus Rampage IV GENE - Page 131

ROG RAMPAGE IV GENE
4-7
Chapter 4
3. TurboV EVO automatically
overclocks the CPU, saves BIOS
settings and restarts the system.
After re-entering Windows, a
message appears indicating auto
tuning success. Click OK to exit.
Using 4.300 Ghz mode
1. Tick the
4.300 GHz, and click
Start.
2. Read through the warning
messages and click OK to start
auto-overclocking.
3. TurboV automatically adjusts and
saves BIOS settings and restarts
the system. After re-entering
Windows, a message appears
indicating auto tuning success.
Click OK to exit.
Using 4.100 Ghz mode
1. Tick the
4.100 GHz, and click
Start.
2. Read through the warning
messages and click OK to start
auto-overclocking.
3. TurboV automatically adjusts and
saves BIOS settings and restarts
the system. After re-entering
Windows, a message appears
indicating auto tuning success.
Click OK to exit.