Asus Rampage V Extreme - Page 183

ASUS RAMPAGE V EXTREME
4-33
Chapter 4
Using the Wake-on-LAN
Ifyouwanttowakeupyourcomputerusingthesmartdevice,ensurethatyouenablethe
computer’sWake-on-LANsettings.
Tocongureyourcomputer’sWake-on-LANsettings:
1. FromBIOSSetup,gotoAdvanced>APMCongurationthensetPowerOnByPCI-E/
PCIto[Enabled].
2. FromWindows
®
OS,dothefollowing:
a. Onyourdesktop,clickStart,right-clickComputer>Managetolaunchthe
ComputerManagementscreen.
b. ClickDeviceManagertoviewalltheinstalleddevices.
c. ClickNetworkAdapters,right-clicktheinstalledmodulecard(Broadcomor
Atheros)thenclickProperties>PowerManagementtab.
d. TicktheseitemsAllowthisdevicetowakeupthecomputerandOnlyallowa
magicpackettowakethecomputer.
For802.11acstandardWi-FiGO!Card,theWake-on-LANfunctionwillbesupportedinthe
laterversionforWindows®8operatingsystem.