ROG MAXIMUS X HERO
1-19
Chapter 1
6. CPU, CPU optional, high amp, water flow, extension, water pump+, AIO pump,
and chassis fan connectors (4-pin CPU_FAN; 4-pin CPU_OPT; 4-pin H_AMP; 3-pin
W_FLOW; 5-pin EXT_FAN; 4-pin W_PUMP+; 4-pin AIO_PUMP; 4-pin CHA_FAN1-3)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the
black wire of each cable matches the ground pin of the connector.
DO NOT forget to connect the fan cables to the fan connectors. Insufcient air ow
inside the system may damage the motherboard components. These are not jumpers!
Do not place jumper caps on the fan connectors!
Ensure to fully insert the 4-pin CPU fan cable to the CPU fan connector.
For better Q-Fan functions, we recommend using 4-pin PWM fans when you connect
powerful fans (1A or above) onto the H_AMP_FAN connector.
Ensure to disable Q-Fan functions if you want to connect powerful 3-pin DC fans (1A
or above) onto the H_AMP_FAN connector.
W_PUMP+ function support depends on water cooling device.
Header Max. Current Max. Power Default Speed Shared Control
CPU_FAN 1A 12W Q-Fan Controlled A
CPU_OPT 1A 12W Q-Fan Controlled A
CHA_FAN1 1A 12W Q-Fan Controlled -
CHA_FAN2 1A 12W Q-Fan Controlled -
CHA_FAN3 1A 12W Q-Fan Controlled -
AIO_PUMP 1A 12W Full Speed B
W_PUMP+ 3A 36W Full Speed B
H_AMP 3A 36W Q-Fan Controlled -
To Next Page
Loading...
