Asus ROG MAXIMUS XI HERO - Page 33

ROG MAXIMUS XI HERO
1-17
Chapter 1
Neverconnecta1394cabletotheUSBconnectors.Doingsowilldamagethe
motherboard!
5. USB 2.0 connectors (10-1 pin USB_E12; USB_E34)
TheseconnectorsarefortheUSB2.0ports.ConnecttheUSBmodulecabletothis
connector,theninstallthemoduletoaslotopeningatthebackofthesystemchassis.
ThisUSBconnectorcomplieswithUSB2.0specicationthatsupportsupto480MBps
connectionspeed.
6. Thermal sensor connector (2-pin T_SENSOR)
Thisconnectorisforthethermistorcablethatallowsyoutomonitorthetemperatureof
yourmotherboard’scriticalcomponentsandconnecteddevices.