Asus ROG STRIX B360-I GAMING - Page 28

1-14
Chapter 1: Product Introduction
Chapter 1
7. CPU, AIO, and chassis fan connectors (4-pin CPU_FAN; 4-pin AIO_PUMP; 4-pin
CHA_FAN)
Connectthefancablestothefanconnectorsonthemotherboard,ensuringthatthe
blackwireofeachcablematchesthegroundpinoftheconnector.
• DONOTforgettoconnectthefancablestothefanconnectors.Insufcientairow
insidethesystemmaydamagethemotherboardcomponents.Thesearenotjumpers!
Donotplacejumpercapsonthefanconnectors!
• EnsurethattheCPUfancableissecurelyinstalledtotheCPUfanconnector.
ROG STRIX B360-I GAMING Fan connectors
A
C
CHA_FAN
GND CHA FAN PWR CHA FAN IN +5V
C
CPU_FAN
CPU FAN PWM
CPU FAN IN
CPU FAN PWR
GND
A
AIO_PUMP
+5V
CHA FAN IN
CHA FAN PWR
GND
B
B
• Connectthepumpcablefromtheall-in-onecooler(AIOcooler)totheAIO_PUMP
header,andconnectthefancablestotheCPU_FANheader.
• TheCPU_FANconnectorsupportstheCPUfanofmaximum1A(12W)fanpower.