Asus ROG STRIX TRX40-E GAMING - Page 33

ROG STRIX TRX40-E GAMING
1-17
Chapter 1
6. Fan and Pump connectors
The Fan and Pump connectors allow you to connect fans or pumps to cool the
system.
Header Max. Current Max. Power Default Speed Shared Control
CPU_FAN 1A 12W Q‑FanControlled A
CPU_OPT 1A 12W Q‑FanControlled A
AIO_PUMP 1A 12W Full‑Speed -
CHA_FAN1 1A 12W Q‑FanControlled -
CHA_FAN2 1A 12W Q‑FanControlled -
CHA_FAN3 1A 12W Q‑FanControlled -
W_PUMP+ 3A 36W Full‑Speed -
• DONOTforgettoconnectthefancablestothefanconnectors.Insufcientair
owinsidethesystemmaydamagethemotherboardcomponents.Thesearenot
jumpers! Do not place jumper caps on the fan connectors!
• Ensurethecableisfullyinsertedintotheconnector.
Forwatercoolingkits,connectthepumpconnectortotheW_PUMP+connector,then
connect the fan connectors to the CPU_FAN and CPU_OPT connectors.