3-6
Chapter 3: General Instruction
• Color Temp.: Contains three preset color modes (Cool, Normal, Warm)
and User Mode.
• Gamma: Contains three gamma modes including 1.8, 2.2, 2.5
• Saturation: The adjusting range is from 0 to 100.
• In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0 ~ 100.
4. Power
You can adjust the Input Device Pop-up, Input Device and Standby
Mode from this main function.
Input Device Pop-up
Input Device
Color
Image
Gaming
Input Select
Power
System Setup
MyFavorite
Auto Rotation
Type-C 1920x1080@ 60Hz
Racing Mode
82% ROG Strix XG16
Standby Mode
• Input Device Pop-up : To enable/disable Input Device & Power Supply
from NB/PC pop-up questions WHENEVER in connection.
• Input Device :
Select “Mobile Phone” if connect to mobile phone ( Power supply function
is not provided under “Mobile Phone” due to common mobile devices
cannot provide enough power output ). Select “NB/PC” if connect to
NB/PC and then select “Charging From NB/PC” with charging function.
This function allows you to sustain the working time for longer.In NB/
PC sub-function, you can disable power supply function by selecting “No
Charging From NB/PC”
* No Charging here means getting power under 100mA, and this does not affect the battery life/usage of host
devices connected.
* Monitor battery power could still drop after turning on Charging from NB/PC or ECO Mode due to some of
devices have limited power output.
• Standby Mode: Select ON for wake up during power saving; Select OFF
to power off monitor after power saving 15 second.
To Next Page
Loading...
