Asus ROG STRIX XG27A - Assembling the Monitor

1-4
Chapter 1: Product Introduction
1.3 Assembling the monitor
To assemble the monitor:
• While assembling the monitor arm/base, we recommend
that you keep the monitor inside its EPS (Expanded
Polystyrene) packaging.
1. Place the display on a cloth on the table, Then attach the base to the
armandxwiththescrewtojointhemtightly.Youcaneasilytighten
thescrewbyngers.
2. Adjust the monitor to the angle that is most comfortable for you.
1
3
2
*Base screw size: M6 x 15mm