Asus ROG STRIX XG27ACS Series - Assembling the Monitor

1-2
Chapter 1: Product Introduction
1.3 Assembling the monitor
To assemble the monitor:
• While assembling the monitor arm/base, we recommend
that you keep the monitor inside its EPS (Expanded
Polystyrene) packaging.
1. Place the display on a cloth on the table, gently attach the stand to
the VESA mount area until the latch locks the stand, then attach the
basetothearmandxwiththescrewtojointhemtightly.Youcan
easilytightenthescrewbyngers.
2. Adjust the monitor to the angle that is most comfortable for you.
2
3
*Base screw size: M6 x 16.2 mm